Wheel loader AR 480T
6000 kg
55.4 kW (74.3 HP)
1.0 - 1.8 m³
Ready for the highest demands: Our wheel loader with telescopic arm
High is not high enough for the weycor AR 480T. The telescopic arm of this wheel loader can be extended to a height of 4.8 m with the standard bucket and 4.6 m with the pallet fork. This means that there are almost no limits to its areas of application.
With its service weight of 6.0 t, an engine output of 55.4 kW(1) (74.3 HP) and a bucket capacity of 1.0 to 1.5 m³, the weycor AR 480T is a true quality wheel loader from the Northwest.
Operating data
Tear out force | 4,300 daN |
Torque | 4,310 daN |
Tipping load, straight | 3,627 kg (2,049 kg) |
Tipping load, articulated | 3,208 kg (1,812 kg) |
Lifting capacity at ground level | 3,600 daN |
Operating pressure of steering hydraulics | 175 bar |
Differing data for use of pallet forks (2)
Static tipping load, straight and articulated | 2,759 kg (1,638 kg) |
Payload 80% even surface (3) | 2,207 kg (1,310 kg) |
Payload 60% uneven surface (3) | 1,655 kg (983 kg) |
(1)
Power output ISO 14396, exhaust gas aftertreatment according to EU 2016/1628
(2)
Movement of the loads basically in ground position
(3)
According to ISO 8313 and EN 474-3
Features and benefits
Powerful drive unit
A weycor wheel loader can be moved in three ways: in operating speed range from 0 to 6.5 km/h, in road speed range at up to 20 km/h or also in optional high speed at up to 40 km/h. Here, 1st and 2nd hydraulic gear as well as forward / reverse travel can be engaged under load. The switching between the forward / backward travel, speed ranges and off-position is done via the weycor joystick. The drive is operated by accelerator and separate inching pedal for best distribution of the hydraulic power for thrust and lifting forces.
Articulated joint
The combination of pendulum joint and the rear oscillating axle provides for excellent maneuverability and crosscountry mobility. Even on challenging terrain, the low center of gravity ensures exceptional stability.
Hydraulic quick-change attachment
The hydraulic quick-change attachment turns the wheel loader into an all-rounder and allows attachments to be changed in a few seconds. The proven weycor kinematics provide high breakout forces and excellent lifting heights. The upwardly tapered loader arm offers the best view of the attachment.
Inching Pedal
As the only manufacturer, our wheel loaders have a separate inching pedal as standard. This prevents the possibility of moving against the operating brake, in contrast to the combination of a brake/inch pedal. A generously proportioned inching range facilitates precise distribution of shearing and lifting forces. The result: less wear and lower fuel consumption.
Latest kinematics technology
The proven and tested weycor kinematics with its exceptional tear-out force and excellent lifting heights. Telescopic cylinder with endposition cushioning.
Spring-loaded brake
The spring-loaded or negative brake in weycor wheel loaders is a closed brake system (oil bath multipledisc brake) which holds the wheel loader securely in position on a slope when the brake or inch function is activated and automatically locks all four wheels when the engine is at a standstill. The multiple-disc brake runs in the oil bath and is particularly low-maintenance and low-wearing as a result.
Comfortable cabin
In addition to the excellent circumferential visibility in the wheel loader, its clearly arranged controls and its ergonomic design.
Easy maintenance
Low-maintenance and quick, easy servicing is achieved by central, consolidated, easy-to-reach service points.