Operating weight
3000 kg
Tandem roller AW 300
The powerful tandem roller for even more performance
weycor tandem rollers are more than the sum of their parts - they are passion in action. With its operating weight of 3 t and a gradeability of 30% (with vibration) and 35% (without vibration), the weycor AW 300 tandem roller is suitable for all areas of application in civil engineering and road construction as well as in the compaction of crushed stone, gravel, sand and soil.
The AW 300 tandem roller is ready for all tasks, with more power, optimized consumption and the special weycor vibration system.
Technical data
| Engine-Model | Perkins 403J-11 |
| Emission | EU STAGE 5 |
| Engine output | 18.4 kW (24.6 HP) |
Drive
| Speed | 0–9 km/h |
| Angular movement | ± 12° |
| Gradeability with vibration | 30 % |
| Gradeability without vibration | 35 % |
Operating data
| Operating weight CECE | 3,000 kg |
| Average axle load | 1,500 kg |
Compaction performance
| Frequency I / II | 52 / 58 Hz |
| Centrifugal force I / II | 29 / 37 kN |
| Average linear drum load | 12.00 kg/cm |
| Amplitude | 0.5 mm |
Features and benefits
Greatest drum diameter in this weight class
The practice has shown that a larger drum diameter has positive effects on the eveness after the compaction process. This is, among other, proven by the following formula: N = Static linear load in kg/cm / Bandages diameter in cm = kg/cm². Here is vividly illustrated that the lower the result is, the more is the load on the hot asphalt surface reduced. This load reduction prevents against the well known micro grooves in the transverse direction.
Largest water tank in this weight class
Sprinkler system with pump and interval timer as standard: Economical water lubrication on the drum surface as long as possible without interruption to compact the hot asphalt as long as needed without sticking on the drum surface.
Vibration front and rear as standard activated separately
Allows sensitive compaction in the first crossings.
Vibration automatic standard
To avoid cross-grooves when change direction, the vibration is switched off briefly at the moment of direction change and then automatically re-enabled.
Drum offset
The front drum is offset by 50 mm to the right side and therefore creating more room for steering corrections when flush compaction on edges are necessary.
No lubricating points
All pivot points of the roller are adapted for life not be lubricated to need, which turns into time and money savings.
Decoupled operating platform
Fatigue-free operation of the machine without disability by decoupling from the frame.
Folding rops standard
For a low transport height.
