Wheel loaders Details

Wheel loader AR 530

Operation weight
7050 kg
Power
80 kW (107 HP)
Shovel capacity
1.3 - 1.5 m³

Particularly good stability with the AR 530 wheel loader

A modern engine, reassuringly high power reserves and contemporary, low emission values: that is the weycor AR 530 wheel loader. In our XL performance class, it demonstrates particularly good stability and is used primarily in the main construction trade, municipal operations, agriculture, material handling or recycling and civil engineering and road construction.  

With an operating weight of around 7 t, an engine output of 80 kW(1) (107 HP) and a bucket capacity of 1.3 to 1.5 m³, the wheel loader is a showcase model when it comes to optimized and sophisticated solutions.

Operating data

Tear out force 6,800 daN
Torque 5,590 daN
Tipping load, straight 5,577 kg
Tipping load, articulated 4,948 kg
Lifting capacity at ground level 6,000 daN
Operating pressure of steering hydraulics 175 bar

Differing data for use of pallet forks (2)

Static tipping load, straight and articulated 4,070 kg
Lifting capacity 5,100 daN
Payload 80% even surface (3) 3,256 kg
Payload 60% uneven surface (3) 2,442 kg

(1) Power output ISO 14396, exhaust gas aftertreatment according to EU 2016/1628
(2) Movement of the loads basically in ground position
(3) According to ISO 8313 and EN 474-3

Features and benefits

Powerful drive unit

A weycor wheel loader can be moved in three ways: in operating speed range from 0 to 6.5 km/h, in road speed range at up to 20 km/h or also in optional high speed at up to 40 km/h. Here, 1st and 2nd hydraulic gear as well as forward / reverse travel can be engaged under load. The switching between the forward / backward travel, speed ranges and off-position is done via the weycor joystick. The drive is operated by accelerator and separate inching pedal for best distribution of the hydraulic power for thrust and lifting forces.

Articulated-pendulum joint

In weycor wheel loaders, we use robust, low-maintenance articulated-swivel joints almost exclusively in conjunction with rigid axes. With an oscillation of ±12° in the rear carriage and an articulation angle of 40°, these provide outstanding cross-country mobility, protect the ground and offer extreme manoeuvrability. With their low centre of gravity, weycor wheel loaders have a high tilt stability even under extreme conditions.

Hydraulic quick-change attachment

The hydraulic quick-change attachment turns the wheel loader into an all-rounder and allows attachments to be changed in a few seconds. The proven weycor kinematics provide high breakout forces and excellent lifting heights. The upwardly tapered loader arm offers the best view of the attachment.

Inching Pedal

As the only manufacturer, our wheel loaders have a separate inching pedal as standard. This prevents the possibility of moving against the operating brake, in contrast to the combination of a brake/inch pedal. A generously proportioned inching range facilitates precise distribution of shearing and lifting forces. The result: less wear and lower fuel consumption.

State of the art kinematics

weycor Z-kinematics is characterised by high frictional forces and excellent lifting heights. The very good parallel guide provides the optimal prerequisites for using pallet forks. When the hoist is lowered with the shovel, the shovel returns automatically to the digging position. The boom that is tapered towards the top provides the best possible view of the attachment and working area at all times, even under difficult operating conditions.

Spring-loaded brake

The spring-loaded or negative brake in weycor wheel loaders is a closed brake system (oil bath multipledisc brake) which holds the wheel loader securely in position on a slope when the brake or inch function is activated and automatically locks all four wheels when the engine is at a standstill. The multiple-disc brake runs in the oil bath and is particularly low-maintenance and low-wearing as a result.

Comfortable cabin

In addition to the excellent circumferential visibility in the wheel loader, its clearly arranged controls and its ergonomic design.

Easy maintenance

Low-maintenance and quick, easy servicing is achieved by central, consolidated, easy-to-reach service points.

Images of wheel loader Radlader AR 530

Videos of wheel loader Radlader AR 530

About weycor

For over 50 years, weycor by Atlas Weyhausen GmbH from Wildeshausen has been developing, building and selling wheeled loaders, tandem rollers and single-drum compactors – construction machines for the use in main construction trades, agriculture, gardening and landscaping, materials handling, recycling and also for local councils.

Contact

Atlas Weyhausen GmbH
Visbeker Straße 35
D-27793 Wildeshausen

+49 (0) 44 31 / 981-0

+49 (0) 44 31 / 981-139

©2024 Atlas Weyhausen GmbH